A valley is the channel where two roof slopes meet, and it takes the run-off from both. A dry valley system uses a preformed valley trough with the tiles cut and fixed alongside it, rather than bedded in mortar that cracks and lets water in. We rebuild leaking valleys with dry valley systems or new lead, and fit them as standard when re-roofing.
The tiles either side of the valley come off and the old mortar or lead is removed.
The valley boards and timbers underneath are checked and replaced if water has rotted them.
A dry valley trough or new lead is fitted, dressed into the gutter at the bottom.
Tiles are cut cleanly to the valley line and mechanically fixed so none can slip.
The valley and the gutter below are cleared so water runs away freely.


Free written quote, and no deposit if you go ahead.
We cover 21 towns, from Iver and Slough to Windsor, Luton and Milton Keynes. Pick yours for what the roofs tend to be like there.
Both work well when done properly. Dry valleys suit most modern tiled roofs. Lead is the traditional choice on slate and on older or listed buildings.
A small split in a lead valley can sometimes be repaired, but a valley that is leaking because the mortar has failed is best rebuilt.
Yes. Erik Kerr’s review on Google describes exactly that: a difficult to get to valley on a 100 year old roof.
We come out, look at the roof properly and give you a written price. No charge, no obligation, and no deposit if you go ahead.
Call 07543 639325 WhatsApp us